ENGINEER PZ65 Screw Removal Locking Pliers
- Product SKU: IRCPEN-PZ65
- Category: E&E Products & Tools, Engineer Tools
Enquiry Now
Hold the screw head and lock it up to twist!!
-
Vertically serrated jaws bite a stuck screw head while locking it securely.
It helps to optimize your grip strength for twisting off stubborn screws. -
Quick release mechanism, just open the handles to unlock the gripping jaws
-
Rubber handles provide you with a comfortable grip.
-
Patented technique
Features
.webp)
Vertical serrations in the center
Grip & remove a stuck screw in seconds
.webp)
Can be retightened with
a hex key wrench (4mm)
Securely hold different workpieces
The max. round bar sizes that can be held with PZ-64 & PZ-65
.webp)
Quick release: Just pull
the handles with both hands
Operation Guide
Step 1 : Loosen the adjusting bolt.
Step 2 : Adjust the opening jaws with the bolt to fit the diameter of a screw.
Step 3 : Fasten the adjusting bolt further (half a turn to the right)
Step 4 : Squeeze the handles to lock the jaws.
1) The tool may not remove specially-hardened, heat-treated or glued screws.
2) Be sure to apply this tool to a screw head, but not to screw thread.
Dome (Truss) Head
Round or Pan Head
Screw head: dia. 3 to 9.5㎜ (PZ-64)
Screw head: dia. 7 to 12mm (PZ-65)
Screw head: dia. 3 to 5.5mm(PZ-66)
| Item No. | O.A. Length | Screw Head Size | Jaws Hardness | Holdable Round Bar | Weight | Material |
| PZ-64 | 145mm | dia. 3 to 9.5mm | HRC57±3 | Max. dia. 28mm | 205g | Body: Cr-Mo Handles: TPR |
| PZ-65 | 185mm | dia. 7 to 12mm | Max. dia. 40mm | 400g | ||
| PZ-66 | 150mm | dia. 3 to 5.5mm | Max. dia. 8mm | 210g |
Hold the screw head and lock it up to twist!!
-
Vertically serrated jaws bite a stuck screw head while locking it securely.
It helps to optimize your grip strength for twisting off stubborn screws. -
Quick release mechanism, just open the handles to unlock the gripping jaws
-
Rubber handles provide you with a comfortable grip.
-
Patented technique
Features
Vertical serrations in the center
Grip & remove a stuck screw in seconds
Can be retightened with
a hex key wrench (4mm)
Securely hold different workpieces
The max. round bar sizes that can be held with PZ-64 & PZ-65
Quick release: Just pull
the handles with both hands
Operation Guide
Step 1 : Loosen the adjusting bolt.
Step 2 : Adjust the opening jaws with the bolt to fit the diameter of a screw.
Step 3 : Fasten the adjusting bolt further (half a turn to the right)
Step 4 : Squeeze the handles to lock the jaws.
Note Screw Head Size
1) The tool may not remove specially-hardened, heat-treated or glued screws.
2) Be sure to apply this tool to a screw head, but not to screw thread.
Dome (Truss) Head
Round or Pan Head
Screw head: dia. 3 to 9.5㎜ (PZ-64)
Screw head: dia. 7 to 12mm (PZ-65)
Screw head: dia. 3 to 5.5mm(PZ-66)
Specifications
| Item No. | O.A. Length | Screw Head Size | Jaws Hardness | Holdable Round Bar | Weight | Material |
| PZ-64 | 145mm | dia. 3 to 9.5mm | HRC57±3 | Max. dia. 28mm | 205g | Body: Cr-Mo Handles: TPR |
| PZ-65 | 185mm | dia. 7 to 12mm | Max. dia. 40mm | 400g | ||
| PZ-66 | 150mm | dia. 3 to 5.5mm | Max. dia. 8mm | 210g |
