Studiomaster SX235 2 x 580W 8ohm 2U Power Amplifier Class AB with 2 Step H amp
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
Studiomaster

Studiomaster SX235 2 x 580W 8ohm 2U Power Amplifier Class AB with 2 Step H amp

Available: Out of Stock
RM2,800.00
Enquiry Now
Share:  

OVERVIEW

The SX2 range are rugged light weight amplifiers capable of producing high quality sound at all power levels. There are three models in the range, all occupy only 2 rack spaces and are forced cooled via a thermally controlled fan.

The SX amplifiers have 3 modes of operation, stereo, mono or bridged and the input sensitivity can be trimmed by +/-3dB for system matching. The inputs use combined XLR and Jack socket combination connectors with a separate link socket to feed additional amplifiers. The outputs use industry standard four pole connectors and also binding posts, giving you total flexibility. Front panel status LEDs provide visual indication of signal levels, bridged mode and power.

The two large level controls aid precise volume setting and the durable black finish steel cabinet can handle life on the road. With the highest powered model weighing only 16.4kg the SX2 range price/performance ratio is the only choice!

Features

  • High efficiency Class AB with 2 step Class H Amplifiers
  • Variable speed fan cooling
  • Sturdy steel construction
  • Combi XLR/Jack inputs
  • Speakon and binding post outputs

Specification

  • Both Channel @ 8ohms RMS: 580watts
  • Both Channel @ 4ohms RMS: 1000watts
  • Bridged @ RMS: 2000watts
  • Power Consumption @230V 1/3 power: 7.9A
  • Input Sensitivity: rated power 4ohm0dBu 0.775V
  • Distortion THD: 1kHz @ rated power 0.03%
  • Frequency Response: 10 – 31kHz (+0/-1dB)
  • Signal to Noise Ratio: 95-100dB unweighted
  • Crosstalk: 95-100dB unweighted
  • Input Impedance: 10k ohm unbalanced, 20k ohm balanced
  • Damping Factor: 250
  • Voltage Gain: 37-40dB
  • Input Filter: switchable 35Hz
  • Input Modes: stereo, parallel and bridged
  • Cooling: Variable speed fan
  • Protection: Full short circuit, open circuit, thermal, RF
  • Output circuit type: Class AB + H 2 step high efficiency output
  • Power Requirements: 110V or 230V +/-10% 50/60Hz
  • Input Connections: Combination XLR, Male XLR link socket
  • output Connections: 4 pole industry standard sockets & binding posts
  • Dimensions: 483mm x 89mm x 435mm
  • Weight (net/shipping): 13.4kg / 18kg

OVERVIEW

The SX2 range are rugged light weight amplifiers capable of producing high quality sound at all power levels. There are three models in the range, all occupy only 2 rack spaces and are forced cooled via a thermally controlled fan.

The SX amplifiers have 3 modes of operation, stereo, mono or bridged and the input sensitivity can be trimmed by +/-3dB for system matching. The inputs use combined XLR and Jack socket combination connectors with a separate link socket to feed additional amplifiers. The outputs use industry standard four pole connectors and also binding posts, giving you total flexibility. Front panel status LEDs provide visual indication of signal levels, bridged mode and power.

The two large level controls aid precise volume setting and the durable black finish steel cabinet can handle life on the road. With the highest powered model weighing only 16.4kg the SX2 range price/performance ratio is the only choice!

Features

  • High efficiency Class AB with 2 step Class H Amplifiers
  • Variable speed fan cooling
  • Sturdy steel construction
  • Combi XLR/Jack inputs
  • Speakon and binding post outputs

Specification

  • Both Channel @ 8ohms RMS: 580watts
  • Both Channel @ 4ohms RMS: 1000watts
  • Bridged @ RMS: 2000watts
  • Power Consumption @230V 1/3 power: 7.9A
  • Input Sensitivity: rated power 4ohm0dBu 0.775V
  • Distortion THD: 1kHz @ rated power 0.03%
  • Frequency Response: 10 – 31kHz (+0/-1dB)
  • Signal to Noise Ratio: 95-100dB unweighted
  • Crosstalk: 95-100dB unweighted
  • Input Impedance: 10k ohm unbalanced, 20k ohm balanced
  • Damping Factor: 250
  • Voltage Gain: 37-40dB
  • Input Filter: switchable 35Hz
  • Input Modes: stereo, parallel and bridged
  • Cooling: Variable speed fan
  • Protection: Full short circuit, open circuit, thermal, RF
  • Output circuit type: Class AB + H 2 step high efficiency output
  • Power Requirements: 110V or 230V +/-10% 50/60Hz
  • Input Connections: Combination XLR, Male XLR link socket
  • output Connections: 4 pole industry standard sockets & binding posts
  • Dimensions: 483mm x 89mm x 435mm
  • Weight (net/shipping): 13.4kg / 18kg